Using a dedicated cellular connection, your system will continue to work and our monitoring center remains connected even if your phone line is cut, the internet goes down, or even during a power outage. Depending on your system, backup batteries typically last anywhere from 18 to 36 hours.

We recommend you call us at 800.782.9688 to have one of our representatives test your system. We’ll have you test your system by arming it and opening a door to send us a signal. Then, that’ll let you know that we’re actively monitoring your system.

If you’re unable to view your cameras from your mobile app, it may be because your network status or internet connection are both down. Contact your internet provider to resolve these issues. If you continue to have problems viewing your cameras, contact us at 800.782.9688.

It depends on how your system is set up. If your alarm is set up to be monitored through your home phone line, then your system will be affected and may not send signals to our monitoring center. If your system is monitored through your home phone and you are planning to disconnect or change your home phone services, contact customer service at 800.782.9688.

Your maintenance plan covers normal wear-and-tear (excluding device batteries), product defects, and equipment failure due to errors in workmanship.

If you plan to replace any doors or windows in your home, contact customer service at 800.782.9688. We recommend having one of our technicians out to remove any hardware before and after construction to properly reconnect your system.

Absolutely! No matter what company installed your current system, our installation team will update it and connect it to our 24/7 monitoring center. Call us at 800.782.9688 and we’ll help get you started.

If you’re moving homes or business locations, you can take Guardian Alarm with you! When you know you’re moving, give us a call at 800.782.9688 and we’ll set you up with one of our consultants to walk through your new property.

Yes! Many insurance providers offer discounts on their policies if your home or business has a monitored security system. Give us a call at 800.782.9688 and we’ll help walk you through the steps you need to take.

If you’re considering a DIY security solution versus a professional service, think about the time it takes to contact local authorities. With a professionally monitored system, your alarm sends signals to our 24/7 monitoring center at the fastest speeds.

Communication failures are associated with radio devices on your system. They occur when power has been shut off, alarm radio signals aren’t working, and the backup battery has lost its charge. Check all your circuit breakers to ensure the unit has A/C power. If there was an extended power failure and it has been restored, try clearing the message on your panel by performing the normal reset procedure for your alarm panel. If you are experiencing regular communication failures, call today to schedule a maintenance request at 800.782.9688.

With our “Smash & Crash” technology, your security panel will still send alarm signals to our monitoring center even if a burglar destroys or disables your panel.

Ambush codes are meant to be used when you’re forced to disarm your system by an intruder. Entering this code into your panel disarms the system normally while also sending an ambush signal to our monitoring center. Upon receiving this signal, we’ll immediately dispatch the police to the site.

We recommend that you test your alarm system each month to ensure it’s in working order. Before testing your alarm system, call us at 800.782.9688 and a representative will put your system into test mode. Once in test mode, you’ll then arm the system and begin testing devices. If the signals did not come in as anticipated, your system may require service.

When there’s an accidental activation of your system and you enter your code, we automatically get a cancel signal that helps prevent false alarms. When a cancel signal is received, no call will be placed to the site since a valid code was entered into the panel.

No. For a single false alarm, there’s no need to request service. However, if you’re regularly receiving false alarms, contact us at 800.782.9688.

All doors and windows with alarm protection must be closed before you’re able to arm your system. Make sure there isn’t any movement in the range of your motion detectors as this can also prevent the system from arming. If issues with arming continue, contact us at 800.782.9688.